Type: Driver
File Name:
File Size: 38.7 MB
58 (3.14)
Downloads: 32
Supported systems: Windows 10, Windows 8.1, Windows 7
Price: Free* (*Free Registration Required)

Download Now


Both procedures are included below. Checking the Total Output Count You should simply press and hold down the [0] key while the laser printer is in a Stand-by mode. Developer Parts. Your message has been reported and will be reviewed by our staff. When the shift amount is increased, the overall sharp m160 is decreased. When the shift amount is decreased, the overall brightness is increased The inclination value changes the gamma gradation. When the set value is increased, the gamma is increased to increase the contrast. Clearer black and white images When the set value is decreased, the gamma is decreased to decrease the contrast. The 7-seg display shows the mode. The initial display is "Shift. Shift is indicated as "b" Brightness. Inclination is indicated as "c" Contrast.

The density LED displays the selected level Exp. The default is [50]. Details of operation Used to adjust the contrast for each mode. Operating procedure Sharp m160 this simulation is executed, warm-up and shading are performed, and the current set value is displayed in two digits. The greater the set value is, the higher the contrast is. The smaller the set value is, the lower the contrast is.

However, the contrasts at Exp. Used set for the following three exposure mode.

toshiba p25 s507Featured Items
intel r pro wireless 3945bg networkOnline Dating Profile Examples - Free Guide to Online Dating
iiyama e2607wsdSharp AR-M160 Printer Review
linksys ae2500Categories

Default: Japan SIM is also linked. Operating procedure When this sharp m160 is executed, the current set value is displayed. The entered set value is stored and a copy is made. When the [CA] key is pressed, the entered value is saved and the simulation is terminated.

The smaller the set value is, the lighter the density is. The LED does not change, either. The exposure level can not sharp m160 adjusted.

Resetting Account; Clear Key - Sharp AR-M Operation Manual [Page 53]

Used to adjust the contrast for each mode. Default: 50 The density LED is not lighted.


Used to set the AE and the limit value at AE toner save. The default is 0. When the [Copy mode select] key is pressed, the machine sharp m160 back to the gamma table setting mode. Use the [Copy mode select] key to select each copy mode.

Supplies for Sharp AR-M160

sharp m160 The code number of the selected copy mode is displayed on the copy quantity display. Enter the adjustment value with the key and press the [START] key, and the entered value is saved a copy is made.

When the set value is increased by 1, the magnification ratio is increased by 0. When the [CA] sharp m160 is pressed instead, the simulation mode is terminated.

In RSPF adjustment, after the machine enters the copy mode of one page, select the single copy sharp m160 with the duplex key to shift to the single copy mode, making two pages of sharp m160 copy. Operating procedure When this simulation is executed, "d" is displayed on the copy quantity display and the machine enters the Flash ROM program writing mode. Use the writing tool on the PC to write the program. During writing, the display is made as follows.

Data reception error 2. Loader function transfer 3. Flash ROM delete 4. Flash Sharp m160 writing Boot section 5.The new Sharp AR-M Digital IMAGER™ delivers everything you need in a low-cost multifunction copier — and much more.


With a sheet paper capacity. For value and versatility in one compact unit, the smart choice for any small office or workgroup is the Sharp AR-M Digital IMAGER�. With its sheet paper capacity, sheet bypass tray and sharp m160 dpi host-based PC printing, this low-cost multifunctional copier.

Related Drivers